Novacryl L has all of the characteristics of a premium laboratory acrylic resin for temporaries. Novacryl L is a co-polymer allowing significantly more color stable for temporary crowns, bridges, inlays, and onlays. Ideal for laboratory use.
– Temporary crown and bridge resin
– Excellent translucency to provide a more natural appearance
– Quick setting time
– Creates a durable temporary crown/ bridge in 6-8 minutes
– Optimal dimensional stability creating perfectly fitting protheses
– Results in a natural and durable temporary for patient satisfaction
– Available in A1- D4 shades, A0 and B0 bleach shades as well as clear and dark incisals.
Enter product video
Enter testimonial product.
Self-curing acrylic Novacryl® Monomer must be mixed only with the Self-curing Novacryl® Polymer for preparing the acrylic used in repair provisional teeth, crowns and bridges, according to the current procedures and techniques in practice in dental laboratories or dental practice.
Acrylic Mixture Ratios:
Weight ratio: Two parts of Self-curing Polymer + One part of Self-curing Monomer.
Volume ratio: Three parts of Self-curing Polymer + One part of Self-curing Monomer.
Preparation of Acrylic Dough:
The acrylic dough is prepared in an adequate container (a dappen dish or a glass, silicon, or porcelain container).
The polymer is poured over the monomer in the indicated ratios.
The mixing is continually made crosswise during 30 seconds approximately in order to ensure the complete incorporation of polymer and monomer particles.
Put a lid Cover on the container to avoid the inclusion of air until the mixture reaches a thickness in a fluid phase.
Finally, Immediately empty the mixture in the corresponding area.
Work Time:
This mixture allows a work time from 3 to 5 minutes approximately, at a room temperature of 23±2 ºC.
Polymerized time:
This mixture has a self-curing average time of 10 minutes approximately.
These intervals can vary according to the room temperature of the site.
Polishing:
Anatomy and contour are perfect as necessary according to the technical conventional dental. Carefully place the bridge or Crown on the support teeth and establish proper occlusion.
